Cold plasma skin applicator
NTP ONE
The NTP ONE Plasma Pen was developed for cosmetic medicine as a cold plasma applicator directly to the skin. Plasma cosmetics consist of the action of active particles of specially mixed PERUN ™ gases activated by means of cold plasma.
Plasma cosmetics
This is a non-invasive method of aesthetic medicine and dermatology. The cosmetic product is compressed in a gaseous form in a container and applied by a plasma source. Plasma activates electrons, molecules and atoms that have an unsurpassed stimulating and cosmetic effect. These particles transfer their energy to the skin, which also neutralizes them.
Maximum efficiency
The plasma in the NTP ONE device is created in a closed space between the head of the plasma pen and the skin, where, thanks to the mechanisms used, there is no other gas or dirt from the environment. The high flow of plasma is maintained by the continuous flow of activating gas into the applicator head space.
Utilized potential
The action of a large number of active plasma particles on the skin is ensured by a small distance that the particles have to cover from their place of origin. Thanks to the unique design, we use the potential of the plasma to one hundred percent and we can replicate each application. No by-products are formed during the plasma formation process.
PERUN™ active gas
The plasma device uses specially mixed cosmetic gas PERUN to generate plasma at low energy. Through the cosmetic gas prepared by us, we can modify the properties of plasma according to the effects we want to achieve in therapy. Cosmetic gasPERUN ™ is mixed with the highest purityin a sterile laboratory. We have one hundred percent control over its composition, and we are not dependent on subcontracting chainsof medical and cosmetic gases of unknown quality.
PERUN™ active gasis not toxic.
PERUN™ activated gas is subject to certification and registration in the European portal of notified cosmetic products CPNP.
Easy operation
Connect all accessories to the control unit according to the enclosed manual, open the valve on the PERUN™ cosmetic gas pressure vessel and switch on the device. Select the appropriate mode (ten-second, twenty-second, or 100-second), depending on which application you plan to run. Place the applicator, or plasma pen, on the skin and press the activation button to start the plasma. A ten-second cycle starts. Change the position on the skin after a beep and repeat the process until the mode is completely finished.
Accelerates processes
The application of active cosmetics, through cold plasma, rapidly accelerates the onset of the effects of cosmetics. It is very helpful in smoothing wrinkles, rejuvenating tired, sagging and aging skin. It helps in the regeneration and stimulation of skin cells, in the treatment of acne, Herpes Simplex, after epilation and scars, or skin mycosis.
Under supervision
The development of the device is supervised by a number of experts, technologists, scientists and researchers. It is created in the laboratory under strictly controlled conditions and its effects are constantly subjected to demanding tests and certifications. It is the subject of several studies and clinical trials.
Pictures
Description and specification
NTP ONE
Plasma pen
- rapid onsetof action
- effective against bacteria
- painless application
- lowers skin pH
- creates a protective biofilm on the skin
- low energy consumption
- homogeneous plasma coverage
- international certification
- rapid onsetof action
- effective against bacteria
- painless application
- lowers skin pH
Control unit
Supply voltage
19V DC 3.42A, 65W
Operating temperature range
from +10°C to +40°C
Relative humidity range
less than 75%
Size (w, h, d)
245x190x70 mm
Weight
1,1 kg
Network adapter
Supply voltage
100-240V AC 50-60Hz , 1.5A
Output voltage
19V DC 3.42A 65W
Size (w, h, d)
103x43x26 mm
Weight
290 g
- creates a protective biofilm on the skin
- low energy consumption
- homogeneous plasma coverage
- international certification
PERUN™ gas bottle
Working pressure / maximum pressure
200Bar / 300Bar
Volume
2 litres
Standard
ISO EN 9809-1
Weight (without gas)
3,69 kg
ERGO-Blue applicator
Rated power
10 w
Active area
150 mm²
Size (w, h, d)
180x31x23 mm
Weight
50 g